shaping machineBC6085

Shaper ismainly used for planing the plane on the small and medium-sized workpieces in small batch production of a single piece

Feature:

Model		BC6085
Maximum cutting length(mmin)		850
Maximum distance from ram bottom to table surface(mm)		400
Maximum table horizontal travel(mm)		710
Maximum table vertical travel(mm)		360
Dimensions of table top surface(L×W)(mm)		800×450
Travel of tool head(mm)		160
Swivel of tool head(°)		±60°
Number of ram strokes per minute		17,24,35,50,70,100
Range of table power feed	horizontel(mm)	0.25~3 12
	vertical(mm)	0.12~1.5 12
Rapid feed of table	horizontel(mm)	1.2
	vertical(mm)	0.58
Width of central T-slot of table(mm)		22
Power of motor(kw)		5.5
Overall dimensions(L×W×H)(mm)		2950×1325×1693
Weight(kg)		2940/3090

Shaper is mainly used for planing the plane on the small and medium-sized workpieces in 

small batch production of a single place,forming the surface and grooves.Its five 

characteristics:

1.Planer bench can about turning angle of the table with horizontal and lift moving mechanism;for planing the inclined plane,thereby expanding the scope of use;

2.Planer cam mechanism,the feed system.

 Change the tool path volume is also very convenient.

3.Planer in the tool path system built-in overload safety agencies,due to careless handling 

or by external influences and cutting overload,take the knife on their own skid ,non-destructive parts to ensure the normal operation of the machine;

4.Slip between the pillow and the bed rail and speed gear to pay and the main sliding guide surface,both the pump shot lubricating oil through the lubrication;

5.Planer is equipped with a clutch and parking brake institutions,so do not have to cut off the power when changing the speed to start