shaping machineBy6050

Shaper ismainly used for planing the plane on the small and medium-sized workpieces in small batch production of a single piece

Model		BC6050
Max.shapping length(mm)		500	650
Max.range of the borizontal movement of the table(mm)		525	630
Max.distance between the ram bottom and table(mm)		370	380
Max.length of the vertical movement of table(mm)		270	315
Dimensions of table top(L×W)(mm)		440×360	630×400
Max. stroke length of the toolhead(mm)		120	120
Max.swivel angle of the toolhead(°)		±60°	±60°
Max.section of tool(W×T)(mm)		20×30	20×30
Number of ram reciprocation per minute(NO/min)		14-80	14-80
Range of table feed	Horizontal	0.2-0.25 0.08-1	0.2-0.25 0.08-1
	Vertical(mm/recip)
Speed of rapid travel of table	Horizontal	0.95 0.38	0.95 0.38
	Vertical
width of the T-slot for center positioning(mm)		18	18
Power of the main motor(kw)		3	3
N.W/G.W(kg)		1650	2200
Overall dimensions(L×W×H)(mm)		2160×1070×1194	2382×1210×1504

Feature:

Shaper is mainly used for planing the plane on the small and medium-sized workpieces in 

small batch production of a single place,forming the surface and grooves.Its five 

characteristics:

1.Planer bench can about turning angle of the table with horizontal and lift moving mechanism;for planing the inclined plane,thereby expanding the scope of use;

2.Planer cam mechanism,the feed system.

 Change the tool path volume is also very convenient.

3.Planer in the tool path system built-in overload safety agencies,due to careless handling 

or by external influences and cutting overload,take the knife on their own skid ,non-destructive parts to ensure the normal operation of the machine;

4.Slip between the pillow and the bed rail and speed gear to pay and the main sliding guide surface,both the pump shot lubricating oil through the lubrication;

5.Planer is equipped with a clutch and parking brake institutions,so do not have to cut off the power when changing the speed to start