shaping machineBC60100

Shaper ismainly used for planing the plane on the small and medium-sized workpieces in small batch production of a single piece

Model		BC60100
Maximum cutting length(mmin)		1000
Maximum table horizontal travel(mm)		800
Maximum distance from ram bottom to table surface(mm)		400
Maximum table vertical travel(mm)		380
Dimensions of table top surface(L×W)(mm)		1000×500
Travel of tool head(mm)		160
Swivel of tool head(°)		±60°
Maximum size of tool shank(W×T)(mm)		30×45
Number of ram strokes per minute		15,20,29,42,58,83
Range of table power feed	(10 steps) horizontal(mm)	0.3~3
	(8 steps) vertical(mm)	0.15~0.5
Rapid feed of table	horizontel(mm)	3
	vertical(mm/min)	0.5
Width of central T-slot of table(mm)		22
Power of motor(kw)		7.50
Overall dimensions(L×W×H)(mm)		3640×1575×1780
Weight(kg)		4870/5150

Feature:

Shaper is mainly used for planing the plane on the small and medium-sized workpieces in 

small batch production of a single place,forming the surface and grooves.Its five 

characteristics:

1.Planer bench can about turning angle of the table with horizontal and lift moving mechanism;for planing the inclined plane,thereby expanding the scope of use;

2.Planer cam mechanism,the feed system.

 Change the tool path volume is also very convenient.

3.Planer in the tool path system built-in overload safety agencies,due to careless handling 

or by external influences and cutting overload,take the knife on their own skid ,non-destructive parts to ensure the normal operation of the machine;

4.Slip between the pillow and the bed rail and speed gear to pay and the main sliding guide surface,both the pump shot lubricating oil through the lubrication;

5.Planer is equipped with a clutch and parking brake institutions,so do not have to cut off the power when changing the speed to start